Modify Selection
- Hazard prevention and control:
- Engineering controls
- or
- Fall protection
- or
- Temperature controls
- or
- Thermal insulation
- or
- Ground control
- or
- Span design
- or
- Pressure arch design
- or
- Entry design
- or
- Roof beam design
- or
- Scaling
- or
- Skin control
- or
- Support design and selection
- or
- Slope design
- or
- Highwall design
- or
- Pillar design
- or
- Facility design
- or
- Equipment design
- or
- Maintainability design
- or
- Workstation design
- or
- Tool design
- or
- Proximity detection
- or
- Electrical safety
- or
- Electrical contact protection
- or
- Lockout tagout
- or
- Grounding
- or
- Circuit protection
- or
- Short circuit protection
- or
- Ground monitoring systems
- or
- Overload protection
- or
- Electrical insulation
- or
- Dust control
- or
- Removal of deposited dust
- or
- Water infusion
- or
- Wet drilling
- or
- Mist drilling
- or
- Foam application
- or
- Sealing of dust sources
- or
- Filtration systems
- or
- Air curtain systems
- or
- Water spraying
- or
- Water mist systems
- or
- Wetting of deposited dust
- or
- Emission controls
- or
- Fuel additives
- or
- Engine derating
- or
- Diesel particulate filters
- or
- Low emission engines
- or
- Alternative fuels
- or
- Catalytic oxidation
- or
- Explosives safety
- or
- Explosives blending
- or
- Ventilation
- or
- Dilution ventilation
- or
- Push pull ventilation
- or
- Fan ventilation
- or
- Blowing ventilation
- or
- Ventilation control
- or
- Diffusion
- or
- Auxiliary ventilation
- or
- Exhaust ventilation
- or
- Recirculating ventilation
- or
- Scrubber induced airflow
- or
- Ergonomic design
- or
- Fire and explosion prevention
- or
- Permissible explosives
- or
- Ignition source elimination
- or
- Explosion proof design
- or
- Spark prevention
- or
- Nonsparking tools
- or
- Water curtains
- or
- Flameproof construction
- or
- Intrinsically safe design
- or
- Methane control
- or
- Degasification
- or
- Gob gas vent holes
- or
- Horizontal boreholes
- or
- Cross measure boreholes
- or
- Bleeder systems
- or
- Explosion suppression
- or
- Rock dusting
- or
- Rock dust barriers
- or
- Inerting atmosphere
- or
- Physical barriers
- or
- Lightning protection
- or
- Physical isolation
- or
- Automation
- or
- Improving visibility
- or
- Reducing glare
- or
- Improving visual contrast
- or
- Fire protection
- or
- Fire spread limitation
- or
- Fire detection
- or
- Smoke detection
- or
- Thermal detection
- or
- CO detection
- or
- Fire suppression
- or
- Noise and vibration control
- or
- Noise shielding
- or
- Vibration absorption
- or
- Noise damping
- or
- Vibration damping
- or
- Noise cancellation
- or
- Noise absorption
- or
- Mechanical isolation
Home Links
Results 121 - 130 of 975
-
1/1/1998 - Peer reviewed journal articlesHorizontal stresses are caused by global plate-tectonic forces. This paper presents six case histories of mines that encountered roof falls or difficult ground conditions at the headgate caused by horizontal-stress concentrations.
-
3/1/1997 - Information CircularsThis proceedings volume contains papers presented at technology transfer seminars sponsored by the National Institute for Occupational Safety and Health (NIOSH) on New Technology for Ground Control in Retreat Mining.
-
9/1/1996 - Safety guidelines, tips, and checklistsThe purpose of this Maintainability Design is to provide a summary of design review points for the maintainability assessment of new or existing underground equipment.
-
1/1/1996 - Peer reviewed journal articlesThis paper reports US Bureau of Mines (USBM) research on the explosibility of coal dusts. The purpose of this work is to improve safety in mining and other industries that process or use coal.
-
1/1/1994 - NIOSH/USBM numbered publicationsThe U.S. Bureau of Mines has developed an easy to use personal computer-based software package to aid in the analysis of the visibility and illumination aspects of mining equipment design.
-
1/1/1994 - NIOSH/USBM numbered publicationsThe design of underground mining equipment was analyzed with respect to ease of maintenance and maintainer safety. Recommendations are made for maintainability design, as well as engineering information for equipment designers and a buyers' guide.
-
1/1/1994 - Information CircularsThis paper describes the history and technology of methane drainage in the US and other countries.
-
3/15/2024A partnership between the NIOSH Mining Program and its stakeholders to share concerns and solutions regarding automation and emerging technologies.
-
3/13/2024 - Contracts and cooperative agreementsA contract with the Missouri University of Science & Technology to investigate real-time ground movement monitoring for improved safety near large excavations using distributed fiber optic sensing.
-
12/14/2023 - Research projectsA project to develop effective measures to prevent hot surface ignitions on mining equipment, improve fire suppression techniques, and develop a diagnostic tool to determine the effect of mine fires on a mine’s ventilation system.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program